Integration of Yeelight W3 Multicolor Bulbs

Owned by Tomasz Nowak
Last updated: 28.11 2022
2 min read

This integration allows to control Yeelight W3 Multicolor Bulb in both RGB and CT modes using a single Lighting Controller output. New generation of Yeelight bulbs has a documented local tcp API, so the bulb is controlled locally and no cloud service is used. There are only few steps to have it done:

  1. Connect the bulb to your WiFi network

  2. Assign it an IP address in your local DHCP service (so that the bulb has always the same IP address)

  3. Enable LAN Control in Yeelight app (to be able to control the bulb with local tcp requests)

  4. Import this template to Loxone Config:

 

5. Change IP address of the bulb to the one set in step 2

6. Download this diagram, open it with Loxone Config and use it in your project:

 

7. Have fun with your new color Wifi bulb!

 

This integration has been first published in comments of this thread: https://www.facebook.com/groups/LoxonePLusers/permalink/5808858272568286/