und
IOA und IOB mit In1 und In2 verbinden
GNDs miteinander Verbinden
Mit
Widerstand (liegt DS2413 bei) eine Verbindung von IO mit VCC herstellen
1-Wire Data wird an IO der DS2413 Platine angelötet
Pin | Signal | Beschreibung |
---|---|---|
1 | VDD | 5V output |
2 | GND | Masse |
3 | OW | 1-Wire-Data |
4 | GND_OW | 1-Wire Return |
5 | SUSO | USB Suspend |
6 | N:C: | Not Connected |
GND von Oben mit GND vom DS9490R verbinden
VCC mit VDD vom DS9490R verbinden
und IO mit OW vom DS9490R verbinden
DS940R | DS2413 | Relais-Karte |
---|---|---|
VDD | VCC | |
GND | GND | GND |
OW | IO | |
IO Widerstand | nach VCC |
et Voila fertig ist die 2-Kanal Relais Platine