Die Grandstream GDS3710 ist einer der günstigeren IP- VideoTürstation mit interessanten Eckdaten, hier ein Auszug:
...
Es gibt ab Firmware 1.0.4.9 die Möglichkeit, bestimmte Variablen wie CARD-ID und SIP-Nummer (ab 1.0.7.19 gib es die Variable Username*) per HTTP Event Notification in der Türstation zu generieren.
...
POST_type für Befehlserkennung:
POST_type == 100 ([Open Door via Card)]
POST_type == 300 ([Open Door via Universal PIN) GDS ] GDS Config unter: Door System Settings → Basic Settings → Local PIN Type "Unifide PIN" → Local PIN to Open Door
POST_type == 301 ([Open Door via Privat PIN) GDS ] GDS Config unter: Door System Settings → Basic Settings → Local PIN Type "Privat PIN" → PIN aus: Door System Settings → Card Management (Pro User)
POST_type == 302 ([Open Door via Guest PIN) ] GDS Config unter: Door System Settings → Basic Settings → Guest PIN
POST_type == 500 [Call Out Log]
POST_type == 504 ([Call Log - Door Bell Call) GDS ] GDS Config unter: Door System Settings → Basic Settings → Call Mode "SIP Number" → Number 1 Called When Doorbell Pressed → "loxberryip:5060," (IP im grunde egal)
POST_type == 601 [Keep Door Open(Immediate)] GDS Config unter: Door System Settings → Keep Door Open
POST_type == 1101 ([System Up)]
POST_type == 1102 ([Reboot)]
POST_type == 1200 ([Hostage Alarm) ] GDS Config unter: Alarm Settings → Alarm Events Config -> Enable Hostage Code
POST_type == 1403 Mainboard 1403 [Mainboard Temperature Normal(69)]
POST_type == 1405 Mainboard 1405 [Mainboard Temperature Too Higher(71)]
POST_type == 1500 [admin log in success]
POST_type == 1501 [admin log in failure]
POST_type == 1502 [admin log off]
POST_type == 1503 [admin log off due to timeout]
Weitere POST_type laut GDS Doku (ID unbekannt)
...